Description
- Part Number: 4inch RPi LCD (A)
- 480x320, 4inch Touch Screen TFT LCD Designed for Raspberry Pi
- Supports FBCP software driver as well, allows to config software resolution and set up dual-display
- Drivers provided (works with your own Raspbian/Ubuntu/Kali)
- Combined with the Raspberry Pi, allows you to: Take photos by touching (up to 17 camera modes) , Use software keyboard (system interaction without keyboard/mouse)
480x320, 4inch Touch Screen TFT LCD Designed for Raspberry Pi
Features
480x320 hardware resolution
Resistive touch control
Supports any revision of Raspberry Pi (directly-pluggable)
Drivers provided (works with your own Raspbian/Ubuntu/Kali)
Supports FBCP software driver as well, allows to config software resolution and set up dual-display
Combined with the Raspberry Pi, allows you to:
*Take photos by touching (up to 17 camera modes)
*Use software keyboard (system interaction without keyboard/mouse)
FAQ
Why the LCD doesn't work with my Raspbian?
* To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
* However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the provided image?
* Make sure the hardware connection is correct and connects fine.
* Make sure the image in TF card is burnt correctly.
* The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
* It is strongly recommended to use a stand-alone 5V/3A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.
Package Contains
4inch RPi LCD (A) *1
Touch pen *1
RPi screws pack (2pcs) *1
For more details you may need to know, pls firstly send me message via Amazon,
I will then send attached link including User Guide for you, thank you for patience :)